Core Bore M4 Electric Core Drill Rigs
This core driller is excellent for the everyday contractor. It allows coring holes from 1 to 6in and even has a handheld feature. Its lightweight and portable features make it a great rig for the job site.
Features
- 6" bit capacity (3" handheld)
- Converts to handheld drill motor in seconds
- Combination stand quickly angles to 45 degrees
- Reversible slide handle (use on the left side or right side of the rig)
- High strength, hard anodized, 1-1/2" x 2" aluminum mast
- 4 Adjustable slide bearings provide superior carriage rigidity
- Carriage lock
- Optional swivel stand, the mast can rotate 360 degrees
- Drill bits are sold separately
- The product may differ from the image shown depending on the model purchased
What's Included?
- Core Bore M-4 Complete Core Drill Rig
- Combo Anchor/Vacuum Base
- Drill Motor
- Mast (Column)
- Carriage
- Vacuum Pump (if purchasing model with a "V" ending)
- Operator's Manual
| Model | Motor | RPM | Weight |
| M4C-14-DK12-V | 16 Amp Weka DK12 | 580/1400/2900 | 74 lbs. |
| M4C-14-DK12 | 16 Amp Weka DK12 | 580/1400/2900 | 67 lbs. |
| M4C-14-DK13-V | 16 Amp Weka DK13 | 970/2330/4830 | 74 lbs. |
| M4C-14-DK13 | 16 Amp Weka DK13 | 970/2330/4830 | 67 lbs. |
| M4C-14-DK16-V | 18 Amp Weka DK16 | 970/2330/4830 | 74 lbs. |
| M4C-14-DK16 | 18 Amp Weka DK16 | 970/2330/4830 | 67 lbs. |
| M4C-15-MW4097-V | 15 Amp Milwaukee | 500/1000 | 85 lbs. |
| M4C-15-MW4097 | 15 Amp Milwaukee | 500/1000 | 68 lbs. |
| M4C-20-MW4004-V | 20 Amp Milwaukee | 300/600 | 85 lbs. |
| M4C-20-MW4004 | 20 Amp Milwaukee | 300/600 | 68 lbs. |
| M4C-20-MW4005-V | 20 Amp Milwaukee | 600/1200 | 85 lbs. |
| M4C-20-MW4005 | 20 Amp Milwaukee | 600/1200 | 68 lbs. |
| M4C-7-DK12-V | 8 Amp Weka DK12 (230V) | 580/1400/2900 | 74 lbs. |
| M4C-7-DK12 | 8 Amp Weka DK12 (230V) | 580/1400/2900 | 66 lbs. |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
