Knuth KMT S 2054 NC- 132210
Product Description
- Solid steel weldment
- NC-controlled back gauge can be easily programmed
- Automatic, semi-automatic and manual mode
- Blades with multiple cutting surfaces
- Manual kerf adjustment
Technical Specs
| Working area | |
|---|---|
| Structural steel plate thickness | 0,1 mm - 4 mm |
| Plate thickness stainless steel | 2 mm |
| Working length | 2050 mm |
| Cutting angle | 1,3 deg |
| Work table height | 810 mm |
| Work table depth | 455 mm |
| Number of support arms | 3 positions |
| Support arms | 940 mm |
| Strokes per minute | 29 H/min |
| Back Gauge | |
|---|---|
| Rear stop | 750 mm |
| Drive capacity | |
|---|---|
| Motor rating main drive | 7,5 kW |
| Measures and weights | |
|---|---|
| Overall dimensions (length x width x height)-height | 2,7 m x 2,15 m x 1,45 m |
| Weight | 3000 kg |
KMT S 2054 NC Brochure.pdf
https://www.knuth.com/Products/Product%20Manuals/228-229_KMT%20S_KMT%20S%20_EN.pdf
Product Details
Machine Frame and Drive System
- The machine frame is made of a very rigid, solid steel weldment
- The upper knives are reversible for use of both sides, and the lower knives feature 4 cutting edges
- A rigid, continuous hold-down fixes the sheet metal plate right in front of the cut line
- The optimum kerf for machining can be adjusted manually
Material Support
- The rigid side angle stop simplifies alignment of the plate to the cut line
- Rugged support arms ensure a strong hold of large plates
- Material support rollers are recessed in the table for easy workpiece handling
Ergonomic Design
- The mobile foot switch gives the operator added flexibility and both hands are free for handling the workpiece
- For a better view of the cut line, the hand safety guard can be flipped up or down
- The bright LED illumination of the cut line creates a clearly visible shadow on the marked line
Rear stop:
- The motorized back gauge ensures precise positioning in automatic, semi-automatic and manual modes
- The NC-controlled back gauge can be easily and quickly programmed
- The easy accessible work area at the back gauge is secured by light curtain
- The machine can be equipped with an optional NC-controlled back gauge for a length up to 1000 mm, or a sheet hold-up device
KMT S 2054 NC Brochure.pdf
https://www.knuth.com/Products/Product%20Manuals/228-229_KMT%20S_KMT%20S%20_EN.pdf
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
