Malibu Boats Response fuel pump. This in-tank high-pressure fuel pump was used on all 2007+ Response series Malibu Boats with an in-tank fuel pump. Models include the Malibu Response, Malibu Response LX, Response LXI, and Response TXi.
Product Specs:
- OEM Malibu Boats Fuel Pump
- This "short" pump is used on the Malibu Boats Response, Response LX, Response LXI, and Response TXI.
- Manufactured by Millenium Industries exclusively for Malibu Boats & Axis Wake.
- Gen 3 pump used on most Malibu Boats 2009+
- Gen 3 pump will replace Gen 2 Pump used in 2007/2008 boats
- 60 PSI fuel pump
- Not used on Indmar LSA Engines
- Malibu part #3020517.1
- Gasket Sold Separately; part #3020900
Installation Tips:
- Install the pump into the tank access hold and align the fitting on the pump toward the molded arrow in the tank
- Torque hardware to 52-65 inch pounds
- 1st Pass - After tightening the first bolt, tighten the next 3 bolts in 90-degree increments until all 12 bolts have been installed
- Starting with your last bolt tightened, go around clockwise and tighten each bolt in order until all bolts have been tightened again
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
