Description
- Combined hydro. Section steel shears/punching with up to 5 processing stations and foot control
- Punching station, flat steel shears, angle steel shears, sectional steel shears, from HPS 45S with notching station
- DS series with two working cylinders and two-foot pedals for simultaneous use with punching station and sectional steel shears
- Stepless adjustment of the stroke
- larger reach for punching station with 620mm optional, available from HPS 55DS
- heavy and stable welded construction
- from HPS 45S as standard with notching knife
- With a powerful 400Volt engine
- V-notching knife, oversized punching device, and larger punching station punching available on request
- Two-stage foot pedal for inching operation
- Standard with MUBEA-holder for stamp no. 1, no. 2 and no. 3 as well as die no. 30, no. 45 and no. 60, use of punch and die no. 4 and no. 80 optional
Advantages of punching over drilling:
- high time savings – cycle times
- no chips
- no cooling
Note:
- All hydraulic sectional shears are delivered with oil.
Technical Specifications
Ă˜ in max. Sheet thickness ** | |
Throat | 355 mm |
stroke | 80 mm |
Stroke/min. | 25 |
Working height punch | 1110 mm |
Steel Bar shears Round/square | 55mm / 50mm |
90 ° cut in mm | 150 x 150 x 15 |
45 ° cut in mm | 80×10 |
working height | 1215 mm |
Material thickness max. | 380 x 25 mm |
Material size max. | 600 x 15 mm |
knife length | 610 mm |
angle cut | 120 x 15 mm |
working height | 935 mm |
Material thickness max. | 13 mm |
width | 60 mm |
depth | 100 mm |
UI profile knife | 200 x 90 mm |
T-profile knives | 120 x 13 mm |
Special V-notching tools | 100 x 100 x 13 mm |
Motor power 50 Hz | 11 kW |
Net Weight | 2920 kg |
pressure | 115 to. |
Dimensions in mm | 2040 x 950 x 2180 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.