343658

GMC MACHINE TOOL GMC Heavy Duty Precision Gap Bed Lathe GML 26120HD

From
$135.85
Learn More
Check Store Availability

We don't have enough stock on hand.

Adding to cart… The item has been added
Added to Cart

Specifications

Max. swing over bed26"
Max. length of workpiece120"
Max. swing over cross slide17-1/4"
Max. Swing in gap35-3/8"
Width of Bed16"
Effective length in gap to spindle9"
Effective length in gap to chuck jaws4-1/2"
Spindle bore4-1/8" D1-8
Taper of spindle centerM.T.#5
Spindle speeds25-1,600 rpm / 16 steps
Longitudinal feeds0.0016-0.055 IPR, 25 kinds
Cross feeds0.0008-0.027 IPR, 25 kinds
Inch threads80-7/16 TPI, 54 kinds
Metric threads0.45-120 mm , 54 kinds
Diametral Pitch threads7/8-160 DP , 42 kinds
Module threads0.25-60mm, 46 kinds
Max. travel of top slide9"
Max. travel of cross slide14-1/2"

Spindle length w/o chuck

Leadscrew length X TPI

20-1/2"

1-1/4" x 4 TPI

Diameter of tailstock quill3-1/2"

Max. travel of tailstock quill

9-1/4"

Taper of tailstock quill centerMT5

Main motor

Rapid traverse motor

15HP, 220V/40A or 440V/20A, 3 phase

1HP, 220V or 440V, 3 phase

Coolant pump1/8 HP, 220V, or 440V, 3 phase
Net weight9,850 lbs.
Overall dimensions, LxWxH187" x 46" x 72"

Standard Features

  • ISO 9001 certified
  • Large spindle bore 4-1/8"
  • Heavy Duty spindle D1-8
  • Heavy Duty guideway width 16"
  • Heavy Duty main motor 15HP
  • 16 spindle speeds from 25-1,600 rpm, 16 speeds
  • 54 kinds of inch threads, and 54 kinds of metric threads
  • Threading and feeding rate change without changing gears
  • Spindle is balanced, hardened and precision ground
  • Spindle is supported at 3-point by high precision bearings
  • All gears and shafts are hardened and precision ground
  • Guideways induction hardened and precision ground
  • Automatic lubrication system in headstock and feed box
  • One year industrial warranty for parts

Standard Equipment

  • Taper turning attachment
  • SINO DRO + Glass Scales
  • Chuck guard with safety shut off
  • Carriage Stop
  • 12" 3-jaw chuck with top reversible jaws, direct mount
  • 16" 4-jaw chuck, direct mount
  • 18" Face plate
  • 7-1/2" large steady rest with roller jaws
  • 3" follow rest
  • Removeable gap
  • 4-way tools post
  • Foot brake
  • Halogen Work light and coolant system
  • Full length splash guard
  • Dead centers
  • Thread chasing dial
  • Tool box and leveling pads

Optional Equipment

  • ALORIS type QC tool post set # 900-0051-500, 6 pcs
  • 15" large steady rest with roller jaws
  • Live Center # 900-0050-05
  • Extra 7-1/2" large steady rest with roller jaws.
Video

WASHING INSTRUCTIONS:

Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.

Reviews