Knuth KRM AT 10/3,0- 131970
Product Description
All machines in this series feature asymmetrical rolls. This geometry provides optimum traction even with thin metal sheets in the stretch-bending phase for high-precision bending. The rear roll is fed manually. The upper roll swivels outward for easy removal of tube-shaped bent workpieces.
- Asymmetrical structure
- Main motor with brakes
- Hardened rollers with wire insertion grooves
- Conical bender
Technical Specs
| Working area | |
|---|---|
| Working length | 1050 mm |
| Plate thickness (max.) | 3 mm |
| Max. plate thickness for conical bending | 2 mm |
| Roll diameter | 90 mm |
| Roller speed | 6 m/min |
| Wire grooves diameter | 4/6/9 mm |
| Cutting Capacities | |
|---|---|
| Plate thickness(max.) - stainless steel | 1,5 mm |
| Drive capacity | |
|---|---|
| Motor rating main drive | 1,1 kW |
| Measures and weights | |
|---|---|
| Overall dimensions (length x width x height)-height | 1,63 m x 0,7 m x 1,2 m |
| Weight | 480 kg |
Product Details
- 3-roller roll bender with asymmetrically positioned rollers
- Rigid machine frame made of ductile cast-iron
- Hardened rollers, suitable for stainless steel
- Main motor with brake system for exact bending
- Pull-out top roller with eccentric lock for easy workpiece removal
- Bottom and rear rollers include wire insertion grooves (standard equipment)
- Conical bending feature is included in standard equipment
- Manual feed or rear roller
- Mobile control panel with foot switch for left/right rotation
https://www.knuth.com/Products/Product%20Manuals/KRM%20AT%2010_3%2C0_KRM%20AT%2020_1%2C5_EN.pdf
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
