Specifications
Bending capacity in Mild Steel: | 14 Ga. |
Bending capacity in Stainless Steel: | 18 Ga. |
Max. hemming thickness for mild steel: | 26 Ga. |
Max. box depth | 6" |
Bending length capacity | 10' |
Bending angle, degree | 0-135 |
Beam adjustment, front and back | 1" |
Minimum reserve bend | 1/2" |
Manual clamping | Standard |
Beam opening | 1-9/16" |
Net weight | 3,250 lbs. |
Shipping weight: | 3,350 lbs. |
Machine Dimensions: | 159" x 32" x 77" |
Shipping Dimensions: | 142" x 30" x 41" |
Standard Features
Pan & Box Brakes are hand operated machines with removable fingers and a large beam opening. With this Brake, you can fabricate pans, boxes, channels, angles, and other metal working shapes.
- One Year Parts Only Warranty
- ISO 9002 certified
- 1-9/16" adjustable beam opening
- 1" beam adjustment (front and back)
- Capable of hemming light gauge material of 26 gauge or thinner
- Capable of straight bending material fully across
- Oilable bearings to maintain precision overtime
- 16 Total fingers assortment:
- 3"/3pcs
- 5"/3pcs
- 6"/3pcs
- 10"/3pcs
- 12"/4pcs
- Adjustable stop gauge is included to allow the operator to perform repeat bends
- 2 - Adjustable counterweights to assist you at max capacity bends
- All steel heavy body construction with extra heavy tie rod for minimum deflection
- Some assembly is required
Optional Equipment
- One piece straight finger to convert to straight brake
- 2" or 2.5" replacement finger
- 3" or 3.5" replacement finger
- 5" or 6" replacement finger
- 10" replacement finger
- 12" replacement finger
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
