| Mfr # | 9192402 |
| Item | Epoxy Mastic Coating Base |
| Sub-Category | Epoxies |
| Color Family | Whites |
| Color | White |
| Finish | Semi-gloss |
| Resin Type | Epoxy Mastic |
| Coverage | 125 to 200 sq ft/gal |
| VOC Content | Less Than 250 g/l |
| Exposure Conditions | Moderate to Severe |
| System Series | 9100 |
| Dry Time | 6 to 12 hr |
| Dry Time Recoat | 16 hr |
| Coating Type | DTM Coating |
| Application Method | Brush, Roller, Spray |
| Application Temperature | 50 Degrees to 100 Degrees F |
| For Use With | 9100 or V9100 System Activators |
| Activator Properties | Low VOC |
| Base Type | Solvent |
| Cure Time | Depends On Activator |
| Coverage Area | Varies |
| Primer Required | Yes |
| Activator Required | Yes |
| Formulation | Epoxy Mastic |
| Minimum Application Temperature | 50 Degrees F |
| Heat Resistant | No |
| Container Type | Can |
| UV Resistant | No |
| Shelf Life | 3 yr |
| Sheen | Semi-Gloss |
| Activator, Base, Paint or Primer | Base |
| Brand & Series | RUST-OLEUM 9100 |
| Dry Time to Recoat | Depends On Activator |
| Surface Material | Concrete, Galvanized Metal, Masonry, Metal, Steel |
| Maximum Temperature Resistance | 300 Degrees F |
| Compatible Activator | Fast-Cure Activator, Immersion Activator, Low-Temperature Activator, Standard Activator |
| Use Location | Exterior, Interior |
| Number of Components | 2-Step System |
| Resistance Properties | Abrasion Resistant, Chemical Resistant, Impact Resistant, Solvent Resistant |
| Maximum Application Temperature | 100 Degrees F |
| Surface Texture | Rough, Smooth |
| Coating Application | Fast Cure, Immersion, Low Temperature, Standard |
| Series Number | 9100 |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
