Description
Standard HG-400 Hydraulic Garage Press with 400-ton Capacity:
A hydraulic garage press with 400-ton capacity is a heavy-duty machine used for pressing, straightening, and bending metal parts in a garage or industrial setting. It works by using hydraulic oil to generate immense pressure, which is applied through a series of cylinders and pistons to exert force on the metal workpiece. This press typically has a large frame, with a bed or platen for holding the workpiece, and can accommodate large and heavy items. The 400-ton capacity refers to the maximum amount of force that the press can exert, making it suitable for heavy-duty tasks.
Main Feature:
- Hydraulic press include replaceable top tools V-block and support table with stops.
- Table can be lifted through a chain driven by the main cylinder
- Micro-switch for traverse adjustment
- Operating modus: Semi-automatic
Specification
- Capacity - 4000 kN = 899224.87 lbs
- Pressure - 31.5 Mpa =Â 4568.08 psi
- Piston Travel - 300 mm =Â 11.811 inches
- Table Travel - 405 mm =Â 15.9449 inches
- Table Size - 800x1200mm =Â 31.4961x47.2441 inches
- Machine Dimensions - 2300x1000x2900mm =Â 90.5512x39.3701x114.1732 inches
- Weight - 6500kg =Â 14330.05 lbs
Standard FeaturesÂ
- Chrome Plated Cylinder
- Welded Steel Frame
- Oil Pressure Gauge
- Pressure Adjustment
- User Manual
- 2 Years of Warranty
- CE Certification
Optional ExtrasÂ
- Pressure Regulator
- V Block
- Automatic Control
- Foot Pedal
- TableÂ
Delivery
Build on demand only
Delivery is 7-12 Weeks from Deposit
Catalogue
Machine Specifications may differ to Website display. Catalogue for reference purposes only. To view available builds, please refer to website.
How to use a Hydraulic Garage Press
To use a hydraulic garage press with 400-ton capacity, follow these steps:
- Prepare the workpiece: Clean and inspect the metal part to be pressed and ensure it is free of any defects or sharp edges that could damage the press.
- Position the workpiece: Place the workpiece on the bed or platen of the press, ensuring it is secure and properly aligned.
- Adjust the press: Use the controls to raise or lower the press arm to the desired height and to adjust the pressure settings to match the requirements of the job.
- Activate the press: Turn on the power to the press and activate the hydraulic system. Slowly apply pressure to the workpiece until it is fully pressed.
- Monitor the process: Observe the workpiece carefully to ensure it is being pressed correctly. If any adjustments are needed, use the controls to adjust the press as required.
- Release the pressure: Once the pressing process is complete, turn off the power to the press and release the hydraulic pressure.
- Remove the workpiece: Carefully remove the pressed workpiece from the press and inspect it to ensure it meets your requirements.
Note: Always follow the manufacturer's instructions and safety guidelines when using a hydraulic garage press. Never exceed the maximum capacity of the press and always use proper protective gear, such as safety glasses and gloves.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
