Upgrade your  Beaver Delta 6'' Jointer 37-260 with Sheartak spiral cutterheads for the following benefits.

* Better quality finish with no tear-out. All the inserts are angled along the helical in a staggered way, making shear-cut effects on even highly figured hardwood.

* Noise is hugely reduced as the spiral cutter head keeps constant contact with the board with only a few knives.

* All the cutters are made of solid tungsten carbide which is much harder and stayer sharp longer than high-speed steel blades.  If one edge is chipped or dull, rotate it 90° for a new sharp edge. Each insert has four cutting edges and can be used four times. 

* Easy to set up. The indexable carbide inserts are precision ground to a very tight tolerance and are interchangeable. Loosen the screws, rotate 90°, and tighten the inserts in minutes. The inserts can be precisely positioned by the taper hole style locking. 

* Smaller carbide inserts remove shorter and thinner materials, which make dust extraction much more accessible. 

* For the long term, spiral cutter heads are cheaper to use and can pay for themselves in a concise time.

Spiral Cutterhead Kit includes:

* High tensile strength alloy steel cutter block.

* 30 carbide inserts installed.

* 5 extra carbide inserts & 5 extra screws free as spare parts.

* 1 Wrench