| Mfr # | EFP-54 |
| For Media Type | Acetic Acid, Citric Acid, Formic Acid, Phosphoric Acid (40% Solution), Antifreeze, Ethylene Glycol, Calcium Chloride, Sodium Bicarbonate, Ammonium Hydroxide, Sodium Hydroxide, Potassium Hydroxide (50%), Water, Sodium Bisulfate, Sodium Bisulfite |
| Max. Flow Rate | 17 gpm |
| Max. Viscosity | 300 CPS |
| Wetted Materials | Polypropylene, FKM, PTFE, 316 Stainless Steel |
| Suction Tube ID | 1 1/4 in |
| Max. Fluid Temp. | 150 Degrees F |
| Discharge Tube Outlet ID | 3/4 in |
| Food Grade | No |
| Includes | Pump Only |
| Suction Tube OD | 1 3/16 in |
| Discharge Tube Outlet OD | 1 in |
| Runs Dry | No |
| Diesel Exhaust Fluid Compatible | No |
| Max. Liquid Temp. | 150 Degrees F |
| For Use With | EF |
| Suction Tube Type | Constant |
| Item | Drum Pump Tube |
| Seal Material | FKM |
| Max. Head | 20 ft |
| Suction Tube Material | Polypropylene |
| Self-Priming | Yes |
| Max. Head Pressure | 8.6 psi |
| For Container Type | Drum, Tote |
| Compatible Chemicals | Acetic Acid 20%, Acetic Acid 80%, Citric Acid 50%, Formic Acid, Phosphoric Acid (40% Solution), Antifreeze (Coolant), Ethylene Glycol, Calcium Chloride, Sodium Bicarbonate (10%), Ammonium Hydroxide, Sodium Hydroxide/Caustic Soda (20%), Sodium Hydroxide/Caustic Soda (50%), Sodium Hydroxide/Caustic Soda (80%), Potassium Hydroxide (50%), Fresh Water, Salt Water, Deionized Water, Sodium Bisulfate, Sodium Bisulfite |
| Discharge Connection Type | Hose Barb |
| Min. Fluid Temp. | 0 Degrees F |
| Series | EF |
| Not Recommended Chemicals | Acetic Acid (Glacial), Chromic Acid 5%, Chromic Acid 10%, Chromic Acid 30%, Chromic Acid 50%, Hydrochloric/Muriatic Acid (20%), Hydrochloric/Muriatic Acid (37%), Hydrochloric/Muriatic Acid (100%), Hydrofluoric Acid (20%), Hydrofluoric Acid (75%), Hydrofluoric Acid 100%, Nitric Acid (10% Solution), Nitric Acid (20% Solution), Nitric Acid (50% Solution), Nitric Acid (Concentrated Solution), Sulfuric Acid (to 10%), Sulfuric Acid (10% - 75%), Sulfuric Acid (75% - 100%), Acetone, Methyl Ethyl Ketone (MEK), Ethyl (Ethanol), Isopropyl (Isopropanol), Methyl (Methanol), Glycerin, Cyclohexane, Gasoline, Heptane, Hexane, Kerosene, Stoddard Solvent (Mineral Spirits), Diesel Fuel, Hydraulic Oils (Petroleum), Hydraulic Oils (Synthetic), Ethyl Acetate, Biodiesel, Formaldehyde 40%, Formaldehyde, Hydrazine, Sodium Hypochlorite/Bleach (to 20%), Lacquer Thinners, Toluene, Xylene, Trichlorethylene (50%), DEF, E85, Anhydrous Ammonia, Ammonia (Liquids), Automatic Transmission Fluid, Brake Fluid, Naphtha, Paint Thinner, Turpentine, Windshield Washer Fluid |
| Grease | NT |
| Gear Lube | NT |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
