| Mfr # | 0711 |
| Item | Rotary Vane Pump |
| Relief Pressure Max. (PSI) | 260 psi |
| GPH of Water @ 50 PSI | 32 gph |
| Compliance | NSF |
| Inlet/Outlet NPTF (In.) | 3/8 in |
| GPH of Water @ 200 PSI | 24 gph |
| Mounting | Carbonator Clamp Style |
| GPH | 34 gph |
| Relief Valve PSI Setting | 125 psi |
| GPH of Water @ 100 PSI | 30 gph |
| External Relief | Not Required |
| Max. Temp. (F) | 158 Degrees F |
| GPH of Water @ 250 PSI | 21 gph |
| Built-In | Relief Valve |
| Min. Flow Rate (GPH) | 21 gph |
| Body Material | Stainless Steel |
| GPH of Water @ 150 PSI | 27 gph |
| Shaft | Stainless Steel |
| Max. Pressure (PSI) | 260 psi |
| By-Pass | Yes |
| Max. Flow (GPH) | 34 gph |
| Includes | Relief Valve |
| Vane Material | Carbon |
| Shaft Material | Stainless Steel |
| Feet of Head - Maximum | 240 psi |
| Operating Temperature - Maximum | 158 Degrees F |
| Standards | NSF |
| Flow Rate @ 150 psi | 16 gph |
| NSF 169 Listed | Yes |
| Compatible Motor Frame | 48Y NEMA, 56C NEMA, M71, M80 IEC |
| Seal Material | Buna-N |
| Viscosity - Maximum | 150 cps |
| Discharge Connection Type | FNPT |
| Flow Rate @ 250 psi | 21 gph |
| For Media Type | Aggressive Liquid, Water |
| Flow Rate @ 200 psi | 14 gph |
| Flow Rate - Maximum | 24 gph |
| Flow Rate @ 50 psi | 22 gph |
| Includes Filter | No |
| Flow Rate - Minimum | 14 gph |
| Media Intake Connection Type | FNPT |
| Operating Pressure - Maximum | 290 psi |
| Filter Rating - Maximum | Not Applicable |
| Operating Temperature - Minimum | 23 Degrees F |
| Flow Rate @ 100 psi | 20 gph |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
