Sheartak Spiral Cutterhead for Kity 1647 Planer Thicknesser with 52 carbide inserts
Woodworkers are now equipping their old planers and jointers with spiral cutterheads for various advantages:
* A smoother finish with no tear-out due to the slight angle of each knife, producing a shear cut. The staggered plane of the spiral cutterhead is superior to a single straight cut, and the combined shear and staggered cut eliminate tear-out, resulting in a glossy surface finish on even highly figured hardwood.
* Significantly reduced noise as the spiral cutterhead allows only a few knives to cut in a staggered way.
* More than ten times the lifespan of high-speed steel due to the 15x15x2.5mm inserts made of sintered tungsten carbide, which is much harder. Each insert has four edges.
* Easy interchangeability as the knives are precisely ground to a tolerance of +/-0.0004" or +/-0.01mm and can be rotated 90° for a new edge. The insert can be changed within minutes by loosening and tightening the screw.
* Easier dust extraction as the spiral cutterhead produces thinner and shorter chips.
* Low cost to use as spiral cutterheads provide a smoother finish, reduce or eliminate sanding work, and do not require sharpening. The product pays for itself in a concise time.
Â
Specifications
Material of Cutterblock: AISI 5140 high tensile strength alloy steel
Material of insert: Grade C3++.
Carbide insert size: 15x15x2.5mm R150
Wrench size: Torx head T type
Â
Kit Includes:
* 52 carbide inserts installed.Â
* 5 extra carbide inserts
* 5 extra Torx screws
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.