It can be smooth and fun to vape with a Geek Vape device, but only until the coil runs out. If you taste burnt or don’t get much smoke, it might be time to change the coil. The good news is? You don’t need to know how to change the coil on a Geek Vape.
In this blog post, we’ll show you how to quickly and easily change the coil on a Geek Vape. No matter what kind of Geek Vape you have, like the Aegis Boost or Zeus Tank, follow these steps. Let’s start!
Why should you switch out your Geek Vape’s coil?
Let’s talk about why it’s important to change your vape coil before we get into the steps:
Burnt Taste: The coil is probably dead if the vape tastes burned or sharp.
If your clouds aren’t very strong, it might be because your coil is old.
Leaks in e-liquid: If the coil is broken, leaks could happen.
Strange Sounds: If you vape and hear strange sounds, it could mean that your coil is broken or flooded.
If you’ve lost your taste, a new coil can help you get it back.
How often should you change the coil?
It depends on how often you smoke, how much e-liquid you use, and how the wattage is set. About every one to two weeks, you should change the coil. If these things happen, you might need a new one:
- It tastes like metal or burned food.
- Not much air
- Having a tank leak
- E-liquid that quickly turns dark
- Now, let’s talk about how to change the coil on your Geek Vape.
What You’ll Need
Before you start, get these things ready:
- Your Geek Vape rig, like the Aegis, Zeus, or Boost
- A new coil that fits your gadget
- A tissue or a piece of paper towel
- Your favorite e-juice
Optional:
A small tool or tweezers to help get coils that are stuck out of the way.
Steps on how to change the coil on a Geek Vape
Step 1: separate the Tank or Pod.
Press the fire button five times to turn off your Geek Vape. Take the pod or tank out of the mod. In the case of the Geek Vape Aegis Boost, just take out the pod. Take the Zeus Sub-Ohm tank off the base to take it apart.
Step 2: Take off the old coil.
This is based on your device:
For Pod Systems: Take the old coil off the bottom of the pod.
Take off the base for tanks. Both remove and pull out the coil, which makes it work like a plug-and-play electric cord.
A tissue or a tool can help you get a better grip on the coil if it gets stuck. Do not hurt the pod or tank.
Step 3: Get the new coil ready.
Before you put in the new coil, prime it so that you don’t get dry hits. A few drops of e-liquid should be put right on the cotton that is showing on the coil to do this. Give it a minute or two to sit.
For bigger coils, you can also drip e-liquid into the holes on the side for soaking.
This step stops your coil from catching on fire and helps it soak up the liquid.
Step 4: Put the new coil in.
To put the new coil in the bottom of your pod or tank, you can either push it in or screw it in. Make sure it’s safe and where it should be.
- Coils that are push-fit will snap into place.
- When you screw threaded coils in, be careful but hard.
Step 5: put the Tank or Pod back together.
After you put in the new coil, put the base or pod back on your phone. Make sure that there are no leaks by making sure that all the parts are tightly sealed.
Step 6: Fill the tank or pod with e-liquid.
Open the fill hole or remove the silicone plug (for pod systems) to add e-liquid to your device. Do not put too much in it.
For five to ten minutes, leave the device alone. For less chance of dry hits, this gives the coil time to soak all the way through.
Step 7: Begin vaping slowly.
Lessen how much power you use when you turn on your gadget. In a soft way, this breaks the coil and stops it from burning.
- Take a few small hits.
- Raise the wattage little by little until you get the amount you want.
- Now you can use your coil again.
How to Make Your Coils Last More Time
These tips will help your Geek Vape coils last longer:
Prime Every Coil: Always prime a new coil before you use it.
Do not vape in a row; let the coil soak up the juice between hits.
Keep the power low. Coils can burn quickly at high wattage.
Choose the Right E-Liquid: Liquids that are thick and sweet tend to clog coils.
Keep the tank full. Do not let the e-liquid go below the holes in the coil.
Each coil will last longer if you do these little things.
What kinds of coils can I use with my Geek Vape?
To understand how to change the coil on a Geek Vape, you first must understand what kind of coils you can use with your Geek Vape. Geek Vape makes a lot of different types, and each one has its own coils. Sometimes the coils won’t work with a device. Check the user guide or the device itself to be sure.
Most of the time, these happen:
- Aegis Boost and Boost Plus work with B Series Coils.
- Don’t use any other coils with the Zeus Sub-Ohm Tank.
- Don’t use any other coils with the Aegis Hero.
Always make sure that replacement coils will work with your gadget twice before you buy them.
Last Thoughts
When you want to try something new, it’s easy and quick to change the coil on your Geek Vape. If you do what this piece says, you won’t have to deal with bad tastes, weak clouds, or leaks that make you mad.
In short:
- Get rid of your gadget.
- Remove the old coil by taking it apart.
- Get the new coil ready and put it in place.
- Put e-liquid back in it and wait.
- Start with a low wattage and let the coil get used to it.
No more bad tastes and more smoke on every puff now that you know how to change the coil on a Geek Vape.
Vapor Hub: The Vaping Company You Can Trust
Vapor Hub is the best place to find high-quality vaping products at low costs. They provide a large choice of devices, e-liquids, and accessories. Vapor Hub is known for its great customer service and speedy shipment. They make shopping easy for both new and experienced vapers. Vapor Hub is the best place to get all of your vaping needs, whether you need the newest Geek Vape coils or high-quality e-juices. They have reliable products and skilled assistance.
Frequently Asked Questions
Q: How long should I wait after putting in a new coil?
A: Let the coil soak for five to ten minutes before you smoke.
Q: Can I clean a burned coil and use it again?
A: Some people rinse their coils to make them last longer, but a burned coil has to be changed most of the time.
